so blog

In cleaning the PC components (Personal computer) we have to be very careful - careful, because it can cause a decrease in computer performance, it can even damage components - components of the computer itself. Before cleaning the PC, first prepare the following tools:

    Screwdriver
    Pliers
    Brush
    Dry fabric
    Eraser
    Blower / Vacuum cleaner small
    Disk Cleaner
Here there are several components that require thorough cleaning.

    1. Casing CPU

    Open the casing using a screwdriver
    Clean the dust that carried the Fan or insect nests on components on the motherboard.
    Clean the rear part of the (in this part of the ventilation or a fan)

  2. CD-ROM or CD-RW
Steps cleansing:

    Operate the computer system
    Insert CD Cleaner

   3. Hard Drive
It needs to be done while taking care of the hard drive are:

    Need to add a fan to reduce heat on Hard disk
    Data cable settings for air circulation running smoothly.

  4. Power Supply
It needs to be done while taking care of Power Supply is:

    Noting the smooth Fan on Power Supply
    It should be added so that the voltage stabilizer tool will reduce the heat emitted Power Supply

   5. RAM
If RAM is often off and touched by hand can be causing corrosion even RAM can be damaged by electricity statistics. How to clean the RAM of corrosion due to the touch of the hand is as follows:

    Using cleaning fluid
    Use a rubber eraser (rub on foot RAM)
It is also worth noting the installation of the RAM slots, is necessary to ensure the RAM plugged with sempurnya. Because if not then in addition to the RAM is not detected by the system, it can also result in damage to RAM.

   6. VGA
To reduce heat to note heatsink or fannya. To clean the fan and heatsink enough with a small brush.

    7. Processor
Processor is the brain of the computer, speed and intelligence depends on the processor speed. Cooling processor consists of a heat sink and cooling fan. It needs to be done when cleaning Processor are:

    Fan memperhatiakan layout so that air can rotate smoothly
    Processor Fan should be selected with high regulations (minimum 5400 rpm)
    Need chosen heat sink with heat conducting material ynag well, such as copper and aluminum.

    8. Motherboard
The motherboard is the place of all the components installed. The motherboard used to connect components to one another.
Clean the motherboard or mainboard with a brush or blower. Dust on the mainboard will cause heat faster computer. Things to consider when cleaning the motherboard are:

    Keeping the temperature of the motherboard is with mempelancar air circulation in the system.
    Cables - cables attached tied with cable binders for air circulation becomes smooth.
    To interference from dust sufficiently cleaned using a brush and vacuum cleaner mini.

Related Posts:

Tweet